KEW 2062BT Clamp Power Meter

KEW 2062BT Clamp Power Meter

Use the KEW 2062BT Clamp Power Meter for the best accuracy.  We understand the engineer's requirements, so the meter is designed like that. The Bluetooth communication outfit association allows you to easily check your device even in the by now the LCD is highly developed. You can add taking place together measurements and graphs as soon as just one button. It can display the waveform of voltage and current. Easy to see whether or not harmonic waves. You can set the threshold values for each measurement vis--vis the app to determine comfortable or not.

Wide range of measurement functions: Yes It can be nimble current, voltage, facility, accord, and inspection phases. This is a real perky value type, so it displays the exact value even in waves. Equipped as soon as PEAK, MAX, MIN, and AVG functions. Easily check the times regulate of faculty Can display voltage, frequency, gift, skill, and power factor at the same.

Power measurement operates for various wiring types: Easy lithe single phase 2 wire, single phase 3 wire, equilibrium, unbalanced 3 heritage, and 3 phase 4 wires, as a result, it can be used in a broad range of sites

Harmonic Measurement Function: You can play a ratio of the voltage and current harmonic waves, which can cause various failures in the arena. You can behave the harmonic waves, occurring to 30 degrees. The total Harmonic Distortion Ratio Supports both THD-R and THD-F You can easily check the harmonic waves in each order using the LCD on the main unit. Displays both current value (or voltage) and content ratio

Key Features:

A teardrop-shaped jaw with a conductor size of 55 mm: Convenient to use at a small office and factory.

• Current up to 1000A rms
• Voltage up to 1000V rms
• Harmonics up to 30th
• Various measurement functions: current, voltage, power, harmonics
     and phase detection
• LCD can display simultaneously the values of voltage and frequency
     or power and power factor
• Each degree of harmonics can be shown on the LCD of the tester
• Bluetooth® communication functions

１. Various measurement functions

• Measurements of current, voltage, power, harmonics, and phase detection are possible.
• True RMS: Indicates a correct value at the distorted waveform.
• Functions of PEAK, MAX, MIN, and AVG are available. Easy to check the temporal change in the power source.
• LCD can display simultaneously the values of voltage and frequency or power and power factor.

2. Power measurement
Power measurement on any wiring system is possible.

KEW 2062BT can perform Single-phase 2-Wire / Single-page 3-Wire
and balance and unbalance measurements of Three-phase 3-wire/ Three-phase 4-wire. The double display can simultaneously
show many parameters like W & PF, W & deg, W & VA, W & Var,
V & A, etc.

3． Harmonics measurement
Harmonics of the voltage and current, which cause various failures at the field, can be measured.
It is possible to measure and show each voltage and current harmonics up to 30th.
The total harmonics distortion factor is in two types of THD-R and THD-F. Each degree of harmonics can be
shown on the LCD of the tester. Both the current value (or voltage value) and the content ratio can be displayed on the same screen.

5. Connectivity
The dedicated Application "KEW Power supports both Android™ and iOS.

• LCD display can be checked at the smart devices.
• Measured values and graphs can be stored with a press of a button.
• Voltage and current can be shown in the waveform display. The existence of the harmonics can be found easily.
• The threshold of each measured value can be set at the application, and PASS and FAIL judgment is possible.