Kyoritsu 1009 Digital Multimeter
The Kyoritsu 1009 digital multimeter (stage state a multitester) is an average-sensing, auto-ranging meter for measuring voltage, current, resistance, capacitance, frequency, and adherence cycles in electrical psychotherapy applications. The meter comes when a set of detachable test leads. The meter trial adherence cycles to 99.99%, indicating the percent of growing a circuit is just about. An audible continuity sensor confirms a circuit conducts electricity, and a diode exam detects the proper vibrant of a circuit's diode.
The LCD can display the gaining measurement value or the highest or lowest measurement value for a session. It shows readings in digits and a bar graph. The relative mode stores a reading in memory to use as a zero reduction for subsequent readings so that fused readings can be compared. The maintenance discharge duty keeps a reading on the LCD, even after the meter is disconnected. The unit automatically turns off after 30 minutes of nonuse to conserve battery vibrancy, and a low-battery indicator signals taking into account the meter's battery's compulsion to be replaced. A removable rubber holster helps protect the meter during transport and storage.
This average-sensing, or average-responding, meter provides accurate readings behind measuring linear gigantic sums, such as usual induction motors and shining lights, where the current or voltage has an undistorted waveform. When turned upon, the meter is in auto-ranging mode and automatically selects the regulated energetic range for the property monster measured. It can be switched to calendar-ranging mode, which allows the operator to choose the occupation effective range.
The LCD has a 4,000-fix definite, meaning it can display occurring to 3,999 units (3-3/4 digits) back the vibrant range needs to be distorted. It meets International Electrotechnical Commission (IEC) safety adequate 61010 and is officer for Category II installations occurring to 600V, which covers large household appliances and devices related to a sound facility supply (such as refrigerators and melody conditioners), and Category III installations going on to 300V, which covers items used as soon as enclosed building circuit installations (such as relief panel parts, branch circuits, and unconditional installations that are merged directly to a building's AC facility supply).
Specification: Kyoritsu 1009 Digital Multimeter
DC V |
400mV/4/40/400/600V (Input Impedance 10MΩ) ±0.6%rdg±4dgt (400mV/4/40/400V) ±1.0%rdg±4dgt (600V) |
AC V |
400mV/4/40/400/600V (Input Impedance 10MΩ) ±1.6%rdg±4dgt (20 - 400mV) ±1.3%rdg±4dgt (4/40V) ±1.6%rdg±4dgt (400/600V) |
DC A |
400/4000µA/40/400mA/4/10A ±2.0%rdg±4dgt (400/4000µA)±1.0%rdg±4dgt (40/400mA) ±1.6%rdg±4dgt (4/10A) |
AC A |
400/4000µA/40/400mA/4/10A ±2.6%rdg±4dgt (400/4000µA) ±2.0%rdg±4dgt (40/400mA/4/10A) |
Ω |
400Ω/4/40/400kΩ/4/40MΩ ±1.0%rdg±4dgt (400Ω/4/40/400kΩ/4MΩ) ±2.0%rdg±4dgt (40MΩ) |
Continuity buzzer |
400Ω (Buzzer sounds below 100Ω) |
Diode test |
1.5V Release Voltage:Approx. 0.4mA Test Current |
Capacitance |
40/400nF/4/40/100µF |
Frequency |
5.12/51.2/512Hz/5.12/51.2/512kHz/5.12/10MHz |
DUTY |
0.1 - 99.9% (Pulse width/Pulse period) ±2.5%±5dgt |
Applicable standards |
IEC 61010-1 CAT III 300V IEC 61010-2-031 IEC 61326 |
Power source |
R6 (1.5V) × 2 |
Dimensions |
161(L) × 82(W) × 50(D)mm |
Weight |
Approx. 280g |
Included Accessories |
7066A (Test leads) 8919 (Ceramic fuse [10A/600V])× 1 8923 (Fuse [0.5A/600V])× 1 R6× 2 Instruction Manual |
Optional Accessories |
7234 (Crocodile clip test lead) 9095 (Carrying case) |