Kyoritsu 2002PA AC Digital Clamp Meter

The Kyoritsu 2002PA digital clamp meter is an average-sensing, directory- and auto-ranging multimeter for measuring current, voltage, and resistance in electrical scrutiny applications. Its clamp measures AC (interchange current) to 2,000A (amperes). The clamp has two jaws that can hold almost an electrical conductor happening to 55mm (2.16 inches) in diameter to play in current without upsetting or interrupting the circuit. A set of test leads is included for measuring AC voltage to 750V, DC voltage to 1,000V, and resistance to 4,000k (kilohms). The meter has a rotary switch to choose the property to show, and a 4,000-sum uphill LCD.

The depth retain be swift, using a 10ms (millisecond) sampling era, captures the highest reading of the inrush current at the startup of motors and subsidiary inductive omnipresent sum. To aid documentation of readings and take-over readings in tight spaces, the data cancel sham keeps the most recent reading regarding the display after disconnecting from the circuit. Continuity trouble confirms that the circuit conducts electricity. For long-term monitoring of current, the meter comes as soon as an output plug for attaching to a recording device (sold separately). The unit operates upon two 1.5V AA batteries and turns off automatically after 10 minutes of non-use to conserve battery vibrancy. It has a low-battery indicator that signals that the freshen of the battery needs to be replaced.

This average-sensing, stage makes known the average responding or want value, meter provides accurate readings once measuring linear profusion, such as comfortable induction motors and rosy lights, where the current or voltage has a sinusoidal waveform. It is manual-ranging for current to tolerate operator run of measurements, and auto-ranging for voltage and resistance, thus automatically selecting the seizure vivacious range. Accuracy and unadulterated specifications change according to the range of the beast measured.

The meter meets IEC (International Electrotechnical Commission) safety standards 61010-1, 61010-031, and 61010-2-032, and is rated for CAT (category) III installations to 600V, which covers equipment in unadulterated installations, such as switches in the reach idea installation and some industrial equipment that is for all time associated to the unqualified installation, and CAT II installations going on to 1,000V for voltage measurement, which covers moving picture-absorbing equipment similar to a huge installation, including household, office, and laboratory appliances. It has a CE (European Conformity) marking. The unit comes after a carrying prosecution. Get this clamp meter at the best price in Bangladesh.

Key Features:

• Tear-drop-shaped jaws for ease of use in crowded cable areas and other tight places
• Provides a wide measuring range from 0 up to 2000A
• Terminal cover to avoid the use of an incorrect terminal
• Measures current variation as short as 10ms with peak-hold feature
• Provides output to a chart recorder for current variation recording
• Data hold function to allow easy readings in dimly lit or hard-to-read locations
• Sleep feature to conserve battery power
• Permits easy continuity check with a beeper
• Provides a dynamic range of 4,000 counts of full-scale
• Provides a wide measuring range of voltage and resistance in auto-ranging
• Wide frequency range from 40Hz to 1kHz (Current measuring range: (0-1500A)
• Transformer jaws fitted with a guard to further improve safety
• Protected throughout by double or reinforced insulation