KYORITSU 2210R AC Digital Clamp Meter is an athletic and roomy weight clamp sensor. It has a broad reading range taking place to 3000A and a backlight LCD. Use this great clamp meter for your measurement to get the best accuracy on the spot.
Flexible digital clamp meter for TRMS measurement of swap current in conductors after a maximum diameter of 150 mm. Backlit LCD following 3150 dots unmovable. It has a "data conformity" show to block the measurement indication upon the display and auto-off in the war of no use. This tool is meant to be used in environments after installation category IV at 600V. For the best performance confidently you can use this one for your best experience.
Key Features: KYORITSU 2210R AC Digital Clamp Meter
• Flexible and lightweight clamp sensor
• Wide reading range up to 3000A
• True RMS
• MIN MAX function
• Backlight LCD
• IEC 61010-1 (CAT IV 600V / CAT III 1000V)
| AC A |
| |
Range |
30.00/300.0/3000A |
| Accuracy |
±3%rdg±5dgt[45-500Hz]
(At the center of the circle formed by the flexible sensor) |
Crest factor
(CF) |
Full scale CF<1.6, half scale<3.2
Effective input crest values are √2 times of the max values of each range. |
| Conductor size |
φ150mm max. |
Influence of
Conductor position |
Additional ±3% (max.) depending on the distance from the center position |
| Overload protection |
5000A AC for 10 seconds |
| Applicable standards |
IEC 61010-1, IEC 61010-2-032
CAT Ⅳ 600V / CAT Ⅲ 1000V Pollution degree 2
IEC 61326-1(EMC) , IEC 60529 IP40 , EN50581(RoHS) |
Operating temperature
& humidity |
0 - +50℃,less than 80% RH (without condensation) |
Storage temperature
& humidity |
-10 - +60℃,less than 70% RH (without condensation) |
| Power source |
R03 / LR03(AAA)(1.5V)×2
※Continuous measuring time：approx.120hours
(Auto power off：approx.15 minutes) |
| Dimensions |
120(L)×70(W)×26(D)：Display unit
φ8.5mm approx.：Cable diameter
1.8m approx.：Cable length |
| Weight |
300g approx. (including batteries) |
| Included Accessories |
9174 (Carrying case)
LR03(AAA)×2, Insruction manual |
