The Kyoritsu 2300R is an AC/DC True RMS fork current tester, able to measure current going on to 100A. The Kyoritsu 2300R current tester features a non-aversion voltage exploit which warns the enthusiast taking into account an audible signal if an AC voltage is avow. Additional functions put in data sticking together an outfit, a zero reach used to do something, and auto-gift off.
With the application of thyristors, inverters, and supplementary cartoon-saving controllers in avant-garde electric wiring, current waveforms often tote occurring harmonic components and are tainted compared to sinusoidal waves (50/60Hz). The Kyoritsu 2300R tester is practiced to squabble out misrepresented waveforms using real RMS as waveforms are internally calculated at all times. In contrast, behind measurements are made following an averaging value tester, and errors are generated in the measurement value because the tester cannot until the termination of time track distorted waveforms.
Small and lightweight, the Kyoritsu 2300R can be used in crowded association boxes, where cables are altogether immediate and space is too limited to clamp cables using a traditional clamp meter. The tester is supplied united to carry a case, batteries, and a protection calendar. Get this clamp meter at an affordable price with a great delivery time all over Bangladesh.
When load current is not affected by the distortion, both averaging value type and genuine RMS (root plan square) type clamp meters accomplish a role the approaching same value of more or less 10A taking into account constant supportive form as the above display samples. However, also load current is affected by some distortions such as inverter, etc.
The averaging value type clamp meter indicates 5.5A instead of 9.7A and the real RMS type clamp meter indicates 7.9A instead of 9.7A behind uncharacteristic nod-form. Accordingly, a precise RMS-type clamp meter is recommendable for the measurement of the equipment when inverter run devices.
Due to the use of thyristors, inverters, and new simulation-saving controllers in recent electric wiring, current waveforms often partner with harmonic components and are distorted compared to sinusoidal waves (50/60Hz).
The Kyoritsu True RMS value tester is adept at appearing in distorted waveforms using precise RMS back waveforms that are being internally calculated for every day. In contrast, before measurements are made as soon as an averaging value tester, errors are generated in the measurement value because the tester cannot at all times track tainted waveforms. (Compared to the truthful RMS value tester, measurement values for the averaging value generate more than 30% errors in some cases.)
Key Features:
- True RMS reading is an essential feature for accurate measurement
- Noncontact voltage function indicates the presence of AC voltage by warning the user with an audible signal
- Set the DC range to zero in one touch with the zero adjust function
- Auto power off
- Designed to international safety standard IEC61010-1 CAT.3 300V
| Current measurement |
AC A 0 to 100.0A ±2.0%rdg±5dgt (50/60Hz)
DC A 0 to ±100.0A ±2.0%rdg±5dgt |
| Crest factor |
2.5 |
| Non contact voltage |
Detect AC voltage without contacting with socket wire
During voltage detection, "Hi" flashes and a buzzer sounds |
| Maximum digit |
1,049 |
| Conductor size |
Max Ø10mm |
| Safety Standard |
IEC 61010-1 CAT III 300V Pollution degree 2 |
| Power source |
R03 (AAA) × 2 (Auto power off: approx.10 minutes)
*Continuous measuring time: AC A approx. 46 hours DC A approx. 52 hours |
| Dimensions |
161.3(L) × 40.2(W) × 30.3(D)mm |
| Weight |
110g (with batteries) |
| Included Accessories |
9113 (Carrying Case)
R03 (AAA) × 2
Instruction Manual |
